We don't run a factory. We run your order.

MDF, Plywood & Particle Board from China — Sourced, Inspected and Shipped for You

One partner for factory selection, pre-shipment inspection, mixed containers and export documents — since 2009.

Send Your Panel List See Panel Types

Get factory-checked options and a quote within 24 hours (Mon–Sat). Or message WhatsApp: +86 152 6584 7535.

2009Operating since
QingdaoMain port — any Chinese port on request
3Mills compared on every order
The Dolphin DEC export team in Liaocheng, Shandong
2009
Operating since
4
Services you can verify
1
Accountable contact
About Us

Your Buying Office in China Since 2009

We are not a manufacturer. We are your sourcing and export execution partner in China. Dolphin Building Decoration Materials (Liaocheng) Co., Ltd. has been buying and exporting wood panels from Shandong since 2009. We select the mill, compare price and lead time, inspect the panels before they are loaded, and prepare the export documents your customs broker will ask for.

What we do on every order: check two or three mills against your specification, put several factories and several products into one container when the order is small, send you inspection photos before the container is sealed, and hand over the certificate copies and shipping documents with the shipment. All certificates are held by the producing mills. Copies are provided with every order.

✓ Factory selection with price comparison
✓ Pre-shipment inspection with photo reports
✓ Mixed-container loading
✓ Export documents for every market
Who You Are Buying From
Products

Panel Types We Source

Plywood, MDF/HDF, particle board and multi-ply board — plain, melamine paper faced or veneer faced, with edge banding to match. Sourced from checked mills to your specification, inspected before loading.

Fiberboard

MDF & HDF Board

2.5–43 mm, E0/E1/E2 grades, plain or moisture resistant. Two or three mills are priced against your specification before we quote.

MDF & HDF Board Specifications →
Wood Panels

Plywood

Commercial, film faced and marine. Ply count, glue type and film weight set to your order, not to what happens to be in stock.

Plywood Types & WBP Glue Grades →
Wood Panels

Particle Board / Chipboard

9–25 mm, plain or melamine faced, for furniture and shop fitting. E1 or E2 by destination market.

Particle Board Grades & Uses →
Wood Panels

Melamine Faced Board

100+ decors matched to your sample. The base board and the facing can come from different mills — we check both.

Melamine Colours & Textures →
Plywood

Multi-Ply Board

Ply count, core species and glue set to your order. The panel that stays flat where particle board gives up.

Multi-Ply Board Specifications →
Faced Panels

Engineered Veneer Faced

Reconstituted veneer pressed onto MDF, HDF or plywood — grain and colour that repeat in the next container.

Engineered Veneer Panels →
Edge Banding

Veneer Edge Banding

Banding cut from the same engineered veneer block as the face, so the edge runs on from the panel.

Veneer Edge Banding →
Edge Banding

PVC Edge Banding

Matched to your decor code in matte, gloss or embossed, supplied in the same container as the boards.

PVC Edge Banding →
Why buyers use us

Four Things a Large Mill Won't Do

No capacity claims here. These are four jobs a mill is not set up to do for a small buyer — and they are what we do instead.

What a large mill won't doWhat it costs youWhat we do instead
Won't take a small order — MOQ starts at a full container, often with a monthly contract volume on topA small buyer cannot open an account, and never reaches a mill price.We buy order by order and price two or three mills, so a single container still lands close to mill price.
Won't mix loads — one container means one mill and one productThree or four panel types become three or four containers, and three or four freight bills.We consolidate: one container, several mills, several products, freight shared.
Won't give you a buyer-side inspection report — quality control is issued by the mill, on the mill's own formsYou find the problem after the goods arrive, when the batch can no longer be traced.We inspect before loading and send the photo report, so problems are fixed before the ship sails.
Won't stay accountable after full payment — the mill is paid and the file is closedA quality dispute across borders is expensive to pursue and rarely worth it.Documents, messages and responsibility stay in one place: one contact, a record you can check.
How we work

Four Steps, One Contact

The same four steps on every order, in the order they happen.

01

Factory selection and price comparison

We price your exact specification at two or three mills and show you the comparison, not a single number.

02

Pre-shipment inspection

Thickness, moisture, density, surface, grade marking and packing are checked and photographed before the container is sealed.

03

Loading and mixed containers

Several mills and several products in one container, with a photo record of the empty box, the stacking and the seal.

04

Export documents

Invoice, packing list, certificate of origin, fumigation and bill of lading — prepared for the broker at your end.

See How Each Step Works
Compliance

Compliance We Require from the Mills

All certificates are held by the producing mills. Copies are provided with every order. What we control is which mill gets your order, and whether its paperwork matches the batch that is loaded.

Certificate held by the mill

No page on this site claims a certificate of our own. Panels travel with the mill's certificate, not with a logo.

Number checked before ordering

Certificate number and issuing body are verified before we place the order — not shown to you after arrival.

Grade marking matched to the batch

E0/E1/E2 and CARB grades are checked on the panels and on the packaging before the container is sealed.

Market documents per destination

SASO/SABER, SONCAP, EAC/GOST and GOEIC requirements change — we confirm them per shipment, not per brochure.

How to verify a certificate before you pay →
Markets

Markets We Serve

Routes, documents and buying requirements for the regions our buyers ship to. Main port Qingdao; any Chinese port available when it saves you time or cost.

Russia & Central Asia →

MDF and plywood to Russia, Kazakhstan and Uzbekistan by sea, rail and road — with EAC/GOST paperwork checked per shipment.

Southeast Asia →

Ho Chi Minh City, Hai Phong and Bangkok, with Form E for ASEAN tariff preference.

South America →

Particle board and melamine faced panels for furniture makers, via Santos and other South American ports.

Middle East & Africa →

Jeddah, Jebel Ali and Dammam, plus Lagos, Durban and Cairo — with SASO, SONCAP and GOEIC documents handled per shipment.
Send Your Panel List

Tell Us What You Need

Specification, quantity and destination port are enough to start. You get factory-checked options and a quote within 24 hours (Mon–Sat).

📍
Based in
Liaocheng, Shandong, China — main port Qingdao
📧
Email
wei@dolphindec.com
💬
WhatsApp
+86 152 6584 7535
✈
Telegram
t.me/+8615265847535

You'll get a reply within 24 hours (Mon–Sat).

Chat with us